Publications

R. Roy, F. Long, M.R. Daymond, “Evaluation of deformation fields associated with irradiation-induced growth and grain boundary interactions”, , 102325 (2025)
V.S. Ramsundar, A. Shaik, K. Daub, M.R. Daymond, S.Y. Persaud, “An In-situ Raman Spectroscopy Investigation of the Oxidation of Proton Irradiated and Cold-Worked 304L Stainless Steel in Oxygenated Water at 300 °C”, , 116447 (2025)
M. Rezvanian, H. Gholamzadeh, K. Daub, F. Long, M.R. Daymond, S.Y. Persaud, “The Effect of Proton irradiation on Dealloying of Alloy 800 in an Aqueous Environment”, , 155554 (2025)
B. Moore, M. Topping, F. Long, M.R. Daymond, “Stress and Temperature Dependence of Irradiation Creep Studied Using Proton Irradiation”, , 155383 (2025)

W. Weber, C. Kinsler-Fedon, V. Keppens, Y. Zhang, A. Mir, "Temperature dependence of irradiation-induced amorphization in a high-entropy titanate pyrochlore”, , (2024)
A. Khanolkar, A. Datye, Y. Zhang, C. Dennett, W. Guo, Y. Liu, W. Weber, H-T. Lin, Y. Zhang, “Effects of irradiation damage on the hardness and elastic properties of quaternary and high entropy transition metal diborides”, , 105106 (2024)
A. Shaik, R. Roy, M. Topping, H. Nordin, S. Persaud, M.R. Daymond, “On the microscale deformation of the oxide layer formed on a Zr-2.5Nb alloy: A micropillar compression study”, , 112420 (2024)
D. Williams, A. Riahi; A. Carcea; J.D. Giallonardo; P. Keech; S.Y. Persaud; M.R. Daymond; R.C. Newman, “Hydrogen Embrittlement and Strain Rate Sensitivity of Electrodeposited Copper: Part I – The Effect of Hydrogen Content”, , 8(79)p1-9 (2024)
F. Long, R. Roy, M.R. Daymond, “Electron microscopy characterization of proton irradiation induced growth in pure Zr”, , 155243 (2024)
R. Roy, F. Long, M.R. Daymond, “A mechanistic study of grain boundary behaviour subjected to irradiation”, , 120075 (2024)
A. Shaik, M. Topping, H. Nordin, S. Persaud, M.R. Daymond, “Nb speciation and microstructural characterization of the oxide layer formed on neutron-irradiated Zr-2.5Nb alloy in high-temperature water”, , 112122 (2024)
V.S. Ramsundar, K. Daub, S.Y. Persaud, M.R. Daymond, “A Facility for Studying Corrosion via In-Situ Raman Spectroscopy and Proton Irradiation”, , 155053 (2024)
N.N. Badr, F. Long, T. Lucas, Y. Luo, M. Topping, L. Balogh, L.K. Béland, Z. Yao, G. King, M.R. Daymond “On the Stable/Metastable Nature of the γ-Hydride Phase in Zircaloy-2: A Microstructural Characterization approach by Electron Diffraction, Electron Energy-Loss Spectroscopy, and Diffraction Line Profile Analysis”, , 155058 (2024)
M. Mohseni, P. Saidi, L.K. Béland, M. Welland, M.R. Daymond, “A hybrid rate theory model of radiation-induced growth”, , 119878 (2024)
R. Roy, M. Topping, M.R. Daymond, “In-situ assessment of microscale crack tip fields in zirconium”, , 108812 (2024)
Y. Luo, J. Byggmästar, M.R. Daymond, L.K. Béland, “Interatomic force fields for zirconium based on the embedded atom method and the tabulated Gaussian Approximation Potential”, , 112730 (2024)
R. Roy, M. Topping, M.R. Daymond, “Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium”, , 119525 (2024)
Y. Zhao, F. Long, Q. Wang, M.R. Daymond, “Deformation microstructures of non-irradiated and proton irradiated zirconium alloy from nanoindentation creep tests characterised by TEM”, , 154810 (2024)
G. Velisa, D. Lancu, E. Zarkadoula, Y. Tong, Y. Zhang, W. Weber, “Ion velocity effect governs damage annealing process in defective KTaO3”, , 365303 (2024)
R. Roy, A. Shaik, M. Topping, M.R. Daymond, “Investigation of fine-scale dislocation distributions at complex geometrical structures by using HR-EBSD and a comparison with conventional EBSD”, , 113498 (2024)

B. Moore, M. Topping, R. Guo, T. Feuerstake, C. McDonald, M.R. Daymond, “The design and implementation of an in-situ mechanical loading apparatus used during proton-irradiations”, , v583, 154529 (2023)
Y. Luo, J. Meziere, G. Samolyuk, G. Hart, M.R. Daymond, L.K. Béland, “A set of moment tensor potentials for zirconium with increasing complexity”, , v19(19) p6848-6856 (2023)
S.Y. Persaud, W.J. Binns, M. Guo, D. Williams, Q. Dong, G.A. Arcuri, K. Daub, R.C. Newman, M.R. Daymond, P.G. Keech, “Applying State-of-the-art Microscopy Techniques to Understand the Degradation of Copper for Nuclear Waste Canisters”, , p1619-1631 (2023)
A. Kamath, F. Long, S. Aiyeru, M. Griffiths, A. Tamm, M.R. Daymond, L.K. Béland, “Solid-state phase transformation explains the mixed crystallographic character of Zr(Nb,Fe)2 nano-precipitates in Zr-2.5Nb”, , p20503-20510 (2023) - Cover article.
N.N. Badr, F. Long, Y. Luo, M. Topping, L.K. Béland, Z. Yao, M.R. Daymond, “On potential Core-Shell Morphologies of δ-Hydride Precipitates in Zircaloy-2: Electron Diffraction and Energy-Loss Spectroscopy”, , 119184 (2023)
J.A. Meziere, Y. Luo, Y. Xia, L.K. Béland, M.R. Daymond, G.L.W. Hart, “Accelerating Training of MLIPs Through Small-Cell Training”, in press , v38, p5095-5105 (2023)
I. Steblevska, T. Feuerstake, M.R. Daymond, "Supervisor Watchdog Circuit to Monitor an Accelerator Beam and Control the Safety Interlock System", , v1056, 168595 (2023)
H. Gholamazadeh, A. Shaik, K. Daub, M. Topping, M.R. Daymond, S.Y. Persaud “A mechanistic study on dealloying-induced stress corrosion cracking of Alloy 800 in boiling caustic solutions”, , 111284 (2023)
P. Changizian, Z. Yao, S. Xu, M.R. Daymond, M. Griffiths, “Mechanical behavior of recrystallized and precipitation-hardened Inconel X-750 before and after helium-implantation and proton irradiation”,, 112970 (2023)
P. Changizian, Z. Yao, F. Long, M. Topping, S. Xu, M.R. Daymond, M. Griffiths, “Mechanical behavior of cold-worked, precipitation-hardened Inconel X-750 before and after helium-implantation”, , 112810 (2023).
N.N. Badr, F. Long, Y. Luo, M. Topping, L.K. Béland, Z. Yao, M.R. Daymond, “On the Trigonal Structure of the ζ-phase in Zirconium: A Microstructural Characterization Approach by Electron Diffraction and Energy-Loss Spectroscopy Techniques”, , 118729 (2023).
I.J.S. Cherubin, M. Topping, F. Long, M.R. Daymond, “Plastic deformation of δ-zirconium hydride during micropillar compression”, , 154285 (2023).
S. Aiyeru, P. Saidi, M.R. Daymond, "Modeling hydride growth and strain-field evolution at a stress concentrator of Zirconium alloys", , 111958 (2023).
S. Aiyeru, P. Saidi, M.R. Daymond, “Finite Element Modeling of Hydrogen Migration and Hydride Precipitation in Zr Alloys”, , 111942 (2023).
Y. Ni, R. Topham, T. Skippon, J.-T. Zhang, S. Hanlon, F. Long, C. Anghel, E. Torres, M.R. Daymond, L.K. Béland, “Detection of Zirconium Hydrides in Transmission Electron Micrographs using Deep Neural Networks”,, 105573 (2023)
M. Topping, P. Changizian, T. Feuerstake, C. McDonald, F. Long, R. Guo, J.T. Zhang, L.K. Béland, M.R. Daymond, “Design and implementation of an ion beam energy degrader for use in the study of nuclear materials”, , 154099 (2023).

F. Long, S. Goldthorpe, M.R. Daymond, “Effect of metallurgical variables on hydride precipitation behavior in Zr-2.5Nb micro pressure tubes”, , v571, 153987 (2022)
A. Mohammadi, M.R. Daymond, A. Docosolis, “New insights into the structure and chemical reduction of graphene oxide membranes for use in isotopic water separations”, , 120785 (2022).
C. Dai, P. Saidi, B. Langelier, Q. Wang, C.D. Judge, M.R. Daymond, M. Mattucci, “Radiation-induced segregation on dislocation loops in austenitic Fe-Cr-Ni alloys”, , 053606 (2022)
A. Kamath, A. Tamm, F. Long, M. Griffiths, M.R. Daymond, L.K. Béland, “Characterization of ZrNbFe(Cr) precipitates in Zr-based alloys using density functional theory”, , 103381 (2022)
M. Topping, F. Long, I.J.S. Cherubin, N.N. Badr, J. Cui, J. S. Park, M.R. Daymond, “Investigating the stability of reoriented hydrides and their reprecipitation using in-situ heating experiments”, , v564, 153670 (2022)
Q. Wang, C.D. Judge, C. Howard, M.A. Mattucci, H. Rajakumar, T. Skippon, M.R. Daymond, G. Bickel, “Characterization of microstructure and microhardness of neutron irradiated Inconel X-750”, , v563, 153644 (2022)
C. Dai, Q. Wang, P. Saidi, B. Langelier, C.D. Judge, M.R. Daymond, M.A. Mattucci, "Atomistic structure and thermal stability of dislocation loops, stacking fault tetrahedra and voids in face-centered cubic Fe", , v563, 15636 (2022)
M. Guo, K. Daub, Q. Dong, F. Long, W.J. Binns, M.R. Daymond, D.W. Shoesmith, J.J. Noel, S.Y. Persaud, "The Early-Stage Corrosion of Copper Materials in Chloride and Sulfide Solutions: Nanoscale Characterization and The Effect of Microstructure", , v169, 031509 (2022)
I.J.S. Cherubin, M. Topping, M.R. Daymond, “Evaluation of irradiation hardening in proton-irradiated δ-zirconium hydride and Zr2.5%Nb”, , v572, 153600 (2022)
S.R. Soria, J. Santisteban, N.L. Buitrago, A. Moya, M. Schulz, M. Grosse, V. Luzin, M. Hache, L. Barrow, M.R. Daymond, “Diffusion of H in Zircaloy-2 and Zr2.5Nb rolled plates between 250°C and 350°C by off-situ neutron imaging experiments”, , v561, 153547 (2022)
I.J.S. Cherubin, F. Long, M.R. Daymond, “High temperature hardness testing of δ-zirconium hydride: yield stress estimation by analytical models”, , v560, 153424 (2022)
P. Saidi, H. Pirgazi, M. Sanjari, S. Tamimi, M. Mohammadi, L.K. Béland, M.R. Daymond, I. Tamblyn, "Deep learning and Crystal Plasticity: A preconditioning approach for accurate orientation evolution prediction", , 114392 (2022)
F. Long, S. Hanlon, M.R. Daymond, "Transformation behavior of hydrides precipitated with or without stress in Zr-2.5Nb. Part I: in-situ S/TEM thermal cycling", , v559, 153428 (2022)
H. Gholamzadeh, M. Topping, K. Daub, S.Y. Persaud, “Characterization of Dealloying and Associated Stress Corrosion Cracking: The Effect of Crystallographic Orientation”, , Submitted, 2022
T. Ghaznavi, S.Y. Persaud, R.C. Newman, “The effect of temperature on dealloying mechanisms in molten salt corrosion”, , Accepted, 2022
H. Gholamzadeh, B. Alsekhan, S. Adil, K. Daub, S.Y. Persaud, “The effect of alloy composition on the dealloying of Ni- and Fe-based engineering alloys in boiling caustic solutions”, , 169 081508 (2022)
T. Ghaznavi, S.Y. Persaud, R.C. Newman, “Electrochemical Corrosion Studies in Molten Chloride Salts”, , 169 061502 (2022)
T. Ghaznavi, M.A. Bryk, S.Y. Persaud, R.C. Newman, “Alloying Effects in High Temperature Molten Salt Corrosion”, , 197 110003 (2022)

Wang, C.D. Judge, C. Howard, M. Mattucci, H. Rajakumar, S. Hoendermis, C. Dixon, M.R. Daymond, G. Bickel, Investigation on the deformation mechanisms and size-dependent hardening effect of He bubbles in 84 dpa neutron irradiated Inconel X-750 micro-tensile specimens, (2021)
S.M. Hanlon, M. Topping, M.R. Daymond, C. Gillen, P. Frankel, “Fracture Mechanics I-SCC Testing and Review of Out-Reactor PCI Behaviour”, in Progress on Pellet–Cladding Interaction and Stress Corrosion Cracking IAEA-TECDOC-1960, (2021)
C. Dai, C. Varvenne, P. Saidi, Z. Yao, M.R. Daymond, L.K. Béland, Stability of vacancy and interstitial dislocation loops in α-zirconium: atomistic calculations and continuum modelling,(2021)
P.-C.A. Simon, C. Frank, L.-Q. Chen, M.R. Daymond, M.R. Tonks, A.T. Motta, “Quantifying the effect of hydride microstructure on zirconium alloys embrittlement using image analysis”, (2021)
M. Mattucci, I. Cherubin, P. Changizian, T. Skippon, M.R. Daymond, “Indentation Size Effect, Geometrically Necessary Dislocations and Pile-Up Effects in Hardness Testing of Irradiated Nickel”, (2021)
P.F.D. Bennett, M. Topping, P.R. Underhill, J.E. Morelli, M.R. Daymond, and T.W. Krause, “Effects of Heat Treatment on CANDU Pressure Tube Electrical Resistivity”, (2021)
P. Changizian, Z. Yao, M.R. Daymond, “Deformation Mechanism Characteristics in a Ni-based Superalloy Inconel X-750: Dislocation/Precipitate interaction”, (2021)
F. Long, N.N. Badr, Z. Yao, M.R. Daymond, “Towards resolving a long existing phase stability controversy in the Zr-H, Ti-H system”, (2021)
P. Saidi, M. Topping, C. Dai, F. Long, L.K. Béland, M.R. Daymond, “The dependence of damage accumulation on irradiation dose rate in zirconium alloys: rate theory, atomistic simulation and experimental validation”, (2021)

P. Saidi, L.K. Béland, M.R. Daymond, “Graphene oxide membranes for water isotope filtration: insight at the nano- and microscale”, (2020)
A. Mohammadi, M.R. Daymond, A. Docosolis, “Graphene oxide membranes for isotopic water mixture filtration: preparation, physicochemical characterization, and performance assessment”, (2020)
D. Kerr, C. Cochrane, M.R. Daymond, “Phase transformation and variant selection in a Zr2.5Nb pressure tube”, , p2724-2737 (2020)
F. Long, M. Griffiths, Z. Yao, M.R. Daymond, “Characterization of phases in the Zr-Nb-Fe ternary system at the Zr-Nb rich side of the phase diagram”, (2020)
Linjiang Chai, Jiahong Dai, Jiying Xia, Korukonda L Murty, Ning Guo, Mark R Daymond, “Correlation of microstructural, textural characteristics and hardness of Ti–6Al–4V sheet β-cooled at different rates”, , p8346-8362 (2020)
P. Saidi, P. Changizian, E. Nicholson, H.K. Zhang, Z. Yao, C.V. Singh, M.R. Daymond, L.K. Beland, “Effect of He on the Order-Disorder Transition in Ni3Al under Irradiation”, (2020)
Z. Wang, Q. Dong, N. Guo, M.R. Daymond, “Crack propagation path selection and plastic deformation at a crack tip in zirconium”, (2020)
S. Xu, F. Long, S.Y. Persaud, N. Guo, Z. Yao, M.R. Daymond, G. Wenhau, L. Zhang, Z. Zhou, “Oxidation behavior of 9Cr-4.5Al ODS steel in 600 °C supercritical water and the effect of pre-oxidation”, (2020)
J. Hiscocks, M.R. Daymond, B.J. Diak, A.P. Gerlich, “High-resolution residual stress mapping of magnesium AZ80 friction stir welds for three processing conditions”, (2020)
Q. Dong, P. Saidi, L. Béland, Z. Yao, C. Dai, M.R. Daymond, “In situ TEM and multiscale study of dislocation loop formation in the vicinity of a grain boundary”,(2020)
H. Qin, Q. Dong, V. Fallah, M.R. Daymond, “Rapid solidification and non-equilibrium phase constitution in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy: Analysis of nano-precipitates, eutectic lamellae and hardness evolution”, (2020)
P. Saidi, Z. Wang, Y. Mao, L.K. Béland, Z. Yao, M.R. Daymond, “A method for calculation of bias factors in anisotropic mediums, application to a-zirconium”,(2020)
Q. Wang, C. Cochrane, T. Skippon, Z. Wang, H. Abdolvand, M.R. Daymond, “Orientation-dependent irradiation hardening in pure Zr studied by nanoindentation, electron microscopies, and crystal plasticity finite element modeling”, (2020)

F. Long, N.N. Badr, Z. Yao, M.R. Daymond, “Characterizing the crystal structure and formation induced plasticity of y-hydride phase in zirconium”, (2019)
C. Dai, P. Saidi, L.K. Béland, Z. Yao, M.R. Daymond, “An atomistic simulation of tension-compression asymmetry response of pyramidal dislocations in deformed hcp zirconium”, (2019)
C. Dai, P. Saidi, M. Topping, L.K. Béland, Z. Yao, M.R. Daymond, “A formation mechanism of c-component vacancy loops in -zirconium”, , p72-76 (2019)
O. Muránsky, L. Balogh, M. Tran, C.J. Hamelin, J.-S. Park, M.R. Daymond, “On the Measurement of Dislocations and Dislocation Structures using EBSD and HRSD Techniques”, (2019)
H. Yu, Q. Dong, H.K. Zhang, Z. Yao, M. Kirk, M.R. Daymond, “In-situ study of heavy ion irradiation induced lattice defects and phase instability in β-Zr of a Zr–Nb alloy”, (2019)
C. Dai, F. Long, P. Saidi, L. K. Béland, Z. Yao, M.R. Daymond, “Primary damage production in the presence of extended defects and growth of vacancy-type dislocation loops in α-zirconium”, (2019)
C. Cochrane, T. Skippon, M.R. Daymond, “Effect of rate on the deformation properties of metastable β in a high Sn content zirconium alloy”, (2019)
O. Shiman, M.R. Daymond, “Phase transformation and microstructural changes during the hydriding and aging processes in a dual phase Zr alloy”, (2019)
Q.B. Ho, O. Osazuwa, R. Modler, M.R. Daymond, M. Gallerneault, M. Kontopoulou, “Exfoliation of graphite and expanded graphite by melt compounding to prepare reinforced, thermally and electrically conducting polyamide composites”, (2019)
T. Skippon, L. Balogh, M.R. Daymond, “Comparison of Electron Backscattering and X-ray Diffraction Techniques for Measuring Dislocation Density in Zircaloy-2”, (2019)
A. Motta, L. Capolungo, L.Q. Chen, M.N. Cinbiz, M.R. Daymond, D. Koss, E. Lacriox, A. Manera, G. Pastore, P.C. Simon, M. Tonks, B. Wirth, M. Zikry, “Hydrogen in Zirconium Alloys: a review”, (2019)
Q. Dong, Z. Yao, H. Qin, M.R. Daymond, “Effect of the addition of Cu on irradiation induced defects and hardening in Zr-Nb alloys”, (2019)
C. Dai, P. Saidi, L.K. Béland, Z. Yao, M.R. Daymond, “Deformation-free nanotwin formation and growth in hcp materials”, in (2019)
Q. Dong, P. Saidi, H. Yu, Z. Yao, M.R. Daymond, “A direct comparison of annealing in TEM thin foils and bulk material: application to Zr-2.5Nb-0.5Cu alloy”, (2019)
Q. Wang, N. Guo, F. Long, M.R. Daymond, “Effect of heavy ion irradiation on Zr-2.5Nb pressure tube alloy, Part 1: orientation dependent mechanical response”, (2019)
Q. Wang, L. Balogh, Q. Dong, N. Guo, Z. Yao, M.R. Daymond, “Effect of heavy ion irradiation on Zr-2.5Nb pressure tube alloy, Part 2: orientation dependent dislocation loop propagation and elemental redistribution”, (2019)
C. Cochrane, M.R. Daymond, “Effect of temperature and loading sense on transformation-induced plasticity in a high Sn content zirconium alloys”, (2019)
Z. Wang, Q. Wang, M.R. Daymond, “Mode I Fracture Testing on Non-Plane Strain Zirconium Foils”, (2019)
S.M. Hanlon, S.Y. Persaud, F. Long, A. Korinek, M.R. Daymond, “A solution to FIB induced artefact hydrides in Zr alloys”, (2019)
P. Changizian, Z. Yao, C. Lu, F. Long, M.R. Daymond, “Radiation Effect on Nano-indentation Properties and Deformation Mechanism of a Ni-based Superalloy X-750”, (2019)
T. Skippon, C. Cochrane, M.R. Daymond, “Crystallographic Orientation Sensitive Measurement of Strain Rate Sensitivity in Zircaloy-2 via Synchrotron X-ray Diffraction”, (2019)
Q. Dong, Z. Yao, H. Qin, M.R. Daymond, “Irradiation damage and hardening in pure Zr and Zr-Nb alloys at 573 K from self-ion irradiation”, (2019)
Z. Wang, C. Cochrane, T. Skippon, Q. Dong, M.R. Daymond, “Dislocation evolution at a crack tip in a hexagonal close packed metal under plane-stress conditions”, (2019)
S. Xu, Z. Zhou, F. Long, H. Jia, N. Guo, Z. Yao, M.R. Daymond, “Combination of back stress and Orowan strengthening in bimodal structured Fe-9Cr-Al ODS steel with high Al addition”, (2019)

C. Cochrane, M.R. Daymond, “Phase transformation temperatures and solute redistribution in a quartenary zirconium alloy”, (2018)
F. Long, J. Kacher, Z. Yao, M.R. Daymond “A tomographic TEM study of tension-compression asymmetry response of pyramidal dislocations in a deformed Zr-2.5Nb alloy”, (2018)
S.M. Hanlon, S.Y. Persaud, F. Long, M.R. Daymond, “Advanced Characterization of Hydrides in Zirconium Alloys". In: J. Jackson, D. Paraventi, M. Wright (eds) Proc. of 18th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The Minerals, Metals & Materials Series. , p577-597 (2018)
H.K. Zhang, Z. Yao, Z. Zhou, O. Kaitasov, M.R. Daymond, “In-situ heavy ion irradiation in ferritic/martensitic ODS steels at 500ºC”, (2018)
O.V. Shiman, E. Tulk, M.R. Daymond, “Synchrotron X-ray diffraction study of zirconium hydride distribution in Zr-2.5%Nb and its redistribution during thermal cycling”, (2018)
N. Guo, Z. Zhang, Q. Dong, H. Yu, B. Song, L. Chai, C. Liu, Z. Yao, M.R. Daymond, “Strengthening and toughening austenitic steel by introducing gradient martensite via cyclic forward/reverse torsion”, (2018)
P. Changizian, A. Brooks, Z. Yao, M.R. Daymond, “Nano-scale mechanical properties and microstructure of irradiated X-750 Ni-based superalloy”, (2018)
N.L. Buitrago, J.R. Santisteban, A. Tartaglione, J. Marín, L. Barrow, M.R. Daymond, M. Schulz, M. Grosse, A. Tremsin, E. Lehmann, A. Kaestner, J. Kelleher, S. Kabra, “Determination of very low concentrations of hydrogen in zirconium alloys by neutron imaging”, (2018)

Yu, H., Dong, Q., Yao, Z., Daymond, M.R., “Stacking faults observed in {10-12} extension twins in a compressed high Sn content Zr alloy”, (2017)
Dai, C., Saidi, P., Yao, Z., Daymond, M.R., “Atomistic simulations of Ni segregation to irradiation induced dislocation loops in Zr-Ni alloys”, (2017)
Liang, J., Yu, H., Barry, A., Corcoran, E.C., Daymond, M.R., “Re-investigation of phase transformations in the Zr-Excel alloy”, (2017)
Brooks, A.J., Yao, Z. “Spectral and raw quasi in-situ energy dispersive X-ray data captured via a TEM analysis of an ODS austentic stainless stell sample under 1MeV Kr2+ high temperature irradiation”, (2017)
Yu, H., Yao, Z., Daymond, M.R., “The stability of thermodynamically morphology and applied stress/strain”, (2017)
Yu, H., Yao, Z., Idrees, Y., Zhang, H.K., Daymond, M.R., “Accumulation of dislocation loops in the α phase of Zr Excel alloy under heavy ion irradiation”, (2017)
Brooks, A.J., Yao, Z., Daymond, M.R., Yu, H., Zhang, G., “Quasi in-situ energy dispersive X-ray spectroscopy observation of matrix and solute interactions on Y-Ti-O oxide particles in an austenitic stainless steel under 1MeV Kr2+ high temperature irradiation”, (2017)
Ahmmed, K.F., Balogh, L., Idrees, Y., Kerr, D., Daymond, M.R., “Thermal creep behaviour in heat-treated and modified textured Zr-Excel pressure tube material”, (2017)
Yu, H., Liang, J., Yao, Z., Kirk, M.A., Daymond, M.R., “Effect of heavy ion irradiation on thermodynamically equillibrium Zr-Excel alloy”, (2017)

Dong, Q., Yu, H., Yao, Z., Long, F., Daymond, M.R., “Study of microstructure and precipitates of a Zr-2.5 Nb-0.5 Cu CANDU spacer material”, (2016)
Dai, C., Balogh, L., Yao, Z., Daymond, M.R., “Atomistic simulations of the formation of component dislocation loops in α-zirconium”, (2016)
Yu, H., Zhang, K., Yao, Z., Kirk, M.A., Daymond, M.R., “Metastable phases in Zr-Excel alloy and their stability under heavy ion (Kr2+) irradiation”, (2016)
Ahmmed, K.F., Daymond, M.R., Gharghouri, M.A., “Microstructural evaluation and crystallographic texture modification of heat-treated zirconium Excel pressure tube material”, (2016)
Mareau, C., Daymond, M.R., “Micromechanical modelling of twinning in polycrystalline materials: Application to magnesium”, (2016)
Knight, S., Diak, B.J., Daymond, M.R., “Crystal plasticity modeling of damage accumulation in dissimilar Mg alloy bi-crystals under high-cycle fatigue”, (2016)
Knezevic, M., Daymond, M.R., Beyerlein, I.J., “Modeling discrete twin lamellae in a microstructural framework”, (2016)
Long, F., Balogh, L., Brown, D.W., Mosbrucker, P., Daymond, M.R., “Effect of neutron irradiation on deformation mechanisms operating during tensile testing of Zr-2.5 Nb” (2016)

Di, S., Yao, Z., Daymond, M.R., Zu, X., Gao, F., “Dislocation-accelerated void formation under irradiation in zirconium”, (2015)
Liang, J., Zhang, M., Ouyang, Y., Yuan, G., Daymond, M.D., “Contribution on the phase equilibria in Zr-Nb-Fe system”, (2016).
Abdolvand, H., Majkut, M., Oddershede, J., Wright, J.P., Daymond, M.D., “Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II-crystal plasticity finite element modeling”, (2015)
Abdolvand, H., Majkut, M., Oddershede, J., Schmidt, S., Daymond, M.R., “On the deformation twinning of Mg AZ31B: A three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model”, (2015)
Abdolvand, H., Majkut, M., Oddershede, J., Wright, J.P., Daymond, M.D., “Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part I-in-situ three-dimensional synchrotron X-ray diffraction measurement”, (2015)
Cai, S., Schaffer, J.E., Ren, Y., Daymond, M.R., “Discovery of a <210> -fiber texture in medical-grade metastable beta titanium wire”, (2015)

Zhang, H.K., Yao, Z., Zhou, Z., Wang, M., Daymond, M.R., “Radiation induced microstructures in ODS 316 austenitic steel under dual-beam ions”, (2014)
Zhang, H.K., Yao, Z., Morin, G., Griffiths, M., “TEM characterization of in-reactor neutron irradiated CANDU spacer material Inconel X-750”, (2014)
Zhang, H.K., Yao, Z., Daymond, M.R., Kirk, M.A., “Elevated temperature irradiation damage in CANDU spacer material Inconel X-750”, (2014)
A.Khan, Z. Yao, M.R. Daymond, “Microstructure Evolution during Electron and Ion Irradiation in Commercial Purity Magnesium”, , p190-1923 (2014)
M. Sattari, R.A. Holt, M.R. Daymond, "Aging Response and characterization of precipitates in Zr alloy Excel pressure tube material", , p265-272 (2014)
M. Sattari, R.A. Holt, M.R. Daymond, "Variant Selection and Transformation Texture in Zirconium Alloy Excel", , p120-123, (2014)
E. Francis, B.M Grant, J. Quinta da Fonseca, P.J. Phillips; M.J. Mills; M.R Daymond; M. Preuss, “High temperature deformation mechanisms in a polycrystalline nickel base superalloy studied by neutron diffraction and electron microscopy”, , p18-29, (2014)
H.K. Zhang, Z. Yao, M.R. Daymond, M.A. Kirk, “Cavity morphology in a Ni based superalloy under heavy ion irradiation with cold pre-injected helium”, , 103508, (2014)
H.K. Zhang, Z. Yao, M. Kirk, M.R. Daymond, “Stability of Ni3(Al, Ti) gamma prime precipitates in a nickel based superalloy Inconel X-750 under heavy ion irradiation”, , p3422-3428 (2014)

A.T.W. Barrow, A. Koreinek, M.R. Daymond, “Evaluating zirconium-zirconium hydride interfacial strains by nano-beam electron diffraction”, , p366-370 (2013).
S. Cai, M.R. Daymond, R. Yang, D.M. Bailey, L.E. Kay, “Influence of short time anneal on recoverable strain in Beta III Ti alloy”, , p172-179 (2013)
M. Sattari, R.A. Holt, M.R. Daymond, “Phase transformation temperatures of Zr alloy Excel”, , p241-249 (2013)
K. Colas, A.T. Motta, M.R. Daymond, J.D. Almer, “Effect of thermomechanical cycling on zirconium hydride reorientation studied by synchrotron X-ray diffraction“, , p586-595 (2013)
A.T.W. Barrow, C. Tofflon-Masclet, J. Almer, M.R. Daymond, “The role of chemical free energy and elastic strain in the nucleation of zirconium hydride”, , p395-401 (2013)
S. Cai, M.R. Daymond, Y. Ren, “Stress induced martensite transformation in Co-28Cr-6Mo alloy during room temperature deformation”, , p209-216 (2013)
S. Cai, M.R. Daymond, Y. Ren, J.E. Schaffer, “Evolution of lattice strain phase transformation of b III Ti alloy during room temperature cyclic loading”, , p6830-6842 (2013)
L. Barrow, A.T.W. Barrow, J.D. Almer, M.R. Daymond, “The Zr20Nb-H phase diagram and the characterisation of hydrides in b-Zr”, , p292-297 (2013).
H. Abdolvand, M.R. Daymond, “Multi-scale modeling and experimental study of twin inception and propagation in hexagonal close-packed materials using a crystal plasticity finite element approach: Part I: average behaviour”, , p783-802 (2013)
H. Abdolvand, M.R. Daymond, “Multi-scale modeling and experimental study of twin inception and propagation in hexagonal close-packed materials using a crystal plasticity finite element approach: Part II: local behaviour”, , p803-818 (2013)
Y. Idrees, Z. Yao, M. Kirk, M.R. Daymond, “In-Situ Study of Defect Accumulation in Zirconium under Heavy Ion Irradiation”, , p95-107, (2013)
O. Muransky, M.R. Daymond, D. Bhattacharyya, S.C. Vogel, L. Edwards, “Load partitioning and evidence of deformation twinning in dual-phase fine-grained Zr-2.5Nb alloy”, , p548-558 (2013)
F. Long, F. Xu, M.R. Daymond, “Temperature dependence of the activity of deformation modes in an hcp zirconium alloy”, , p4183-4193 (2013)
Y. Idrees, Z. Yao, M. Sattari, M.A. Kirk, M.R. Daymond, “Irradiation Induced Microstructural Changes in Zr-Excel Alloy”, , p138-151 (2013)
T. Skippon, B. Clausen, M.R. Daymond, "Effect of loading method on lattice strain measurements via neutron diffraction", , p169-178 (2013)
H.K. Zhang, F. Long, Z. Yao, M.R. Daymond “Novel techniques of preparing TEM samples for characterisation of irradiation damage”, , p251-257 (2013).
S. Di, Z. Yao, M.R. Daymond, F. Gao, “Molecular dynamics simulations of irradiation cascades in alpha-zirconium under macroscopic strain”, , p95-99 (2013)

A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, “Irradiation damage in commercial purity magnesium”, (2012)
E. Tulk, M. Kerr, M.R. Daymond, “Study on the effects of matrix yield strength on hydride phase stability in Zircaloy-2 and Zr 2.5 wt% Nb”, , p93-104 (2012)
H. Abdolvand, M.R. Daymond, “Internal strain and texture development during twinning; comparing neutron diffraction measurements with crystal plasticity finite element approaches”, (2012)
S. Cai, M.R. Daymond, R.A. Holt, “Deformation of high -phase Zr-Nb alloys at room temperature”, (2012)
G.B. Allen, M. Kerr, M.R. Daymond, “Measurement and modelling of strain fields in hydrides precipitated at a stress concentration”, (2012)
A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, “Effect of foil orientation on damage accumulation behaviour in magnesium during irradiation and annealing response of dislocation loops”, (2012)
G. Tutuncu , M. Motahari, M.R. Daymond, E.Ustundag, “A modified Rietveld method to model highly anisotropic ceramics”, , p1494-1502
H.M. Reiche, S.C. Vogel, P. Mosbrucker, E.J. Larson, M.R. Daymond, “A furnace with rotating load frame for in situ high temperature deformation and creep experiments in a neutron diffraction beam line“, , 053901
T. Skippon, C. Mareau, M.R. Daymond, “On the determination of single crystal plasticity parameters by diffraction: optimization of a polycrystalline plasticity model using a Genetic Algorithm”, , p627-643, (2012)
L. Balogh, D.W. Brown, P. Mosbrucker, F. Long, M.R. Daymond, “Dislocation structure evolution induced by irradiation and plastic deformation in Zr-2.5Nb nuclear structural material determined by neutron diffraction line profile analysis”, , p5567-5577 (2012)
B.M.B. Grant, E.M. Knoche, J.Q. da Fonseca, M.R. Daymond, M. Preuss, “Deformation of an advanced nickel based superalloys at room temperature studied by neutron diffraction and electron microscopy”, , p6829-6841 (2012)

R.Y. Zhang, M.R. Daymond, R.A. Holt, “Parametric study of stress state development during twinning using 3D finite element modeling”, (2011) pp 2725-2735.
W. Li, R.A. Holt, M.R. Daymond, F. Xu “Influence of prior dislocation structure on anisotropy of thermal creep of cold-worked Zr–2.5Nb tubes”, , p138-144 (2011)
H. Abdolvand, M.R. Daymond, C. Mareau,“Incorporation of twinning into a crystal plasticity finite element model: evolution of lattice strains and texture in Zircaloy-2”,, p1721–1738(2011),
Cai, S.,Daymond M.R., Holt R.A., Oliver E.C., “Evolution of internal strains in a two phase zirconium alloy during cyclic loading”, , p5305-5319(2011)
C. Mareau, M.R. Daymond, “Comparison of experimentally determined texture development in Zircaloy-2 with predictions from a rate dependent polycrystalline model”, , p8676-8686 (2011)
Colas, K.B., A.T. Motta, M.R. Daymond, M. Kerr, J.D. Almer “Hydride platelet reorientation in Zircaloy studied with synchrotron radiation diffraction”, , JAI103033. (2011)
Mosbrucker, P., M.R. Daymond, R.A. Holt “In situ studies of variant selection during the alpha-beta-alpha phase transformation of Zr2.5Nb”, , JAI103066. (2011)
Benson, M.L. , P.K. Liaw, H. Choo, D.W. Brown, M.R. Daymond, D.L. Klarstrom, “Strain-induced phase transformation in a cobalt-based superalloy during different loading modes”, , p6051-6058, (2011)
B.M.B. Grant, E. Knoche, M. Preuss, J.Q. da Fonseca, M.R. Daymond, “Effect of lattice misfit on deformation mechanisms at high temperature”, , p144-149. (2011)
Akhtar, R., Daymond, M.R., Almer, J.D., Mummery, P.M., “Lattice strains and load partitioning in bovine trabecular bone”, , p716-723 (2011)

Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., Stafford, S., “Observation of growth of a precipitate at a stress concentration”, , p341-344 (2010)
Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., “Mapping of crack tip strains and twinned zone in an hcp alloy”, , p1578-1588 (2010)
C. Mareau, M.R. Daymond, “Study of internal strain evolution in Zircaloy-2 using polycrystalline models: comparison between a rate-dependent and a rate-independent formulation”, , p3313-3325 (2010)
M. Preuss, J.Q. da Fonseca, V. Allen, D.G. Leo-Prakash, M.R. Daymond, “Twinning in structural materials with an hcp crystal structure”, ; p377-389 (2010)
M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, S. Vogel, “Texture inheritance and variant selection through an hcp – bcc – hcp phase transformation”, , p4053-4066 (2010)
Colas, K.B., A.T. Motta, Y.S. Chu, J.D. Almer, M.R. Daymond, M. Kerr, A.D. Banchik, P. Vizcaino and J.R. Santisteban, “In-situ study of hydride precipitation kinetics and re-orientation in Zircaloy using synchrotron radiation”, , p6575-6583 (2010)

��ϳԹ��Դ

Materials at Extremes Nuclear Research Institute

Connect with MAX-Nuclear

Research at Queen's University

���ϳԹ���Դ

Publications

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Connect with MAX-Nuclear

��ϳԹ��Դ